initial commit

hvst.py

@@ -0,0 +1,103 @@
+from cadquery import *
+import math
+
+tabletop_depth = 800  # currently, almost all parameters are derived from the table depth
+#tabletop_depth = 600
+
+alpha_max = 70
+
+tabletop_adjuster_assembly_spacing = 100  # symmetric distancing assumed
+
+feet_adjuster_width = 60  # feet_adjuster is moving part inside adjuster assembly
+feet_adjuster_lenght = 60
+feet_adjuster_height = 60
+
+adjuster_assembly_wall_thickness = 20  # might be different for front and back...
+adjuster_assembly_length = tabletop_depth - 2*tabletop_adjuster_assembly_spacing
+adjuster_assembly_width = feet_adjuster_width + 2*adjuster_assembly_wall_thickness
+adjuster_assembly_height = feet_adjuster_height + 2*adjuster_assembly_wall_thickness
+
+
+bore_holes_distance_feet_adjuster = adjuster_assembly_length - 2*adjuster_assembly_wall_thickness - feet_adjuster_width
+ld = bore_holes_distance_feet_adjuster
+lower_feet_bore_holes_distance = bore_holes_distance_feet_adjuster  # this is only the case, if min feet angle is 45 degrees
+
+lower_h = ld * math.sqrt(2)*math.sin(math.radians(alpha_max))
+lower_feet_assambly_pivot_point_from_fixed_leg = ld * math.sqrt(2)*math.cos(math.radians(alpha_max))
+lower_feet_assambly_pivot_point_from_moving_end = ld - lower_feet_assambly_pivot_point_from_fixed_leg
+
+lower_foot_width = 80
+lower_foot_height = 50
+lower_foot_length = lower_feet_bore_holes_distance + lower_foot_height
+lower_feet_assembly_base_plate_height = 20
+lower_feet_assembly_side_wall_thickness = 25
+lower_feet_assembly_width = 100
+lower_feet_assembly_length = lower_feet_bore_holes_distance + lower_foot_height  # 2* 1/2 lower_foot_height
+lower_feet_assembly_height = lower_feet_assembly_base_plate_height + lower_foot_height
+lower_feet_assembly_side_wall_height = lower_foot_height
+lower_feet_assembly_side_wall_radius = lower_foot_height/2
+lower_feet_assembly_side_wall_bearing_hole_distance_from_outer = lower_feet_assembly_side_wall_radius
+lower_feet_assembly_side_wall_bearing_hole_distance_from_bottom = lower_feet_assembly_side_wall_radius
+lower_feet_assembly_bearing_hole_distance_from_assembly_bottom = lower_feet_assembly_base_plate_height + lower_foot_height/2
+lower_feet_assembly_bearing_hole_radius = 11
+lower_feet_assembly_bearing_hole_depth = 10
+lower_feet_assembly_pin_diameter = 10
+
+
+## parameter end!
+
+
+# actual parts:
+lower_foot_base_plate = Workplane("XY").box(lower_feet_assembly_width,lower_foot_length,lower_feet_assembly_base_plate_height)\
+    .edges("|Z").fillet(lower_feet_assembly_side_wall_thickness/2)
+lower_foot_side_wall_left = Workplane("YZ").box(lower_foot_length,lower_feet_assembly_side_wall_height,lower_feet_assembly_side_wall_thickness)\
+    .faces("|Y").edges(">Z").fillet(lower_feet_assembly_side_wall_radius)\
+    .faces("-X").edges(">Z").fillet(lower_feet_assembly_side_wall_thickness/2)\
+    .faces("+X").workplane()\
+        .center(lower_foot_length/2-lower_feet_assembly_side_wall_bearing_hole_distance_from_outer,0).hole(2*lower_feet_assembly_bearing_hole_radius,lower_feet_assembly_bearing_hole_depth)\
+
+lower_foot_bearing_pin_slide = Workplane("YZ",origin=((lower_feet_assembly_side_wall_thickness-lower_feet_assembly_bearing_hole_depth)/2,\
+                                          -(lower_feet_bore_holes_distance-lower_feet_assambly_pivot_point_from_moving_end)/2,\
+                                          0))\
+        .box(lower_feet_assambly_pivot_point_from_moving_end,lower_feet_assembly_pin_diameter,lower_feet_assembly_bearing_hole_depth)
+
+lower_foot_bearing_pin_slide = lower_foot_bearing_pin_slide\
+    .union(Workplane("YZ",origin=(lower_feet_assembly_side_wall_thickness/2-lower_feet_assembly_bearing_hole_depth,
+                                  -(lower_feet_bore_holes_distance/2-lower_feet_assambly_pivot_point_from_moving_end),0.00001))\
+           .circle(lower_feet_assembly_pin_diameter/2).extrude(lower_feet_assembly_bearing_hole_depth))\
+    .union(Workplane("YZ",origin=(lower_feet_assembly_side_wall_thickness/2-lower_feet_assembly_bearing_hole_depth,
+                                  -(lower_feet_bore_holes_distance/2),0))\
+           .circle(lower_feet_assembly_pin_diameter/2).extrude(lower_feet_assembly_bearing_hole_depth))
+        
+lower_foot_side_wall_left = lower_foot_side_wall_left.cut(lower_foot_bearing_pin_slide)
+#show_object(lower_foot_side_wall_left)
+#show_object(lower_foot_bearing_pin_slide)
+#bearing_pin_slot = Workplane("YZ").center(200,0).box(lower_feet_assambly_pivot_point_from_moving_end,lower_feet_assembly_pin_diameter,lower_feet_assembly_bearing_hole_depth)\
+#    .workplane(offset=-lower_feet_assembly_bearing_hole_depth/2)\
+#        .center(-lower_feet_assambly_pivot_point_from_moving_end/2,0).circle(lower_feet_assembly_pin_diameter/2,0).extrude(lower_feet_assembly_bearing_hole_depth)\
+#        .center(lower_feet_assambly_pivot_point_from_moving_end-0.00001,0).circle(lower_feet_assembly_pin_diameter/2,0).extrude(lower_feet_assembly_bearing_hole_depth)
+
+#show_object(bearing_pin_slot)
+
+#lower_foot_side_wall_left = lower_foot_side_wall_left.cut(bearing_pin_slot)
+#show_object(Workplane("YZ").box(lower_feet_assambly_pivot_point_from_moving_end,lower_feet_assembly_pin_diameter,lower_feet_assembly_bearing_hole_depth)\
+#            .faces("|Y").edges("|X").fillet(4.8))
+
+
+lower_foot_side_wall_right = lower_foot_side_wall_left.mirror(mirrorPlane="YZ")
+
+#show_object(lower_foot_base_plate)
+#show_object(lower_foot_side_wall_left)
+#show_object(lower_foot_side_wall_right)
+
+
+lower_foot_assy_left = (
+    Assembly(lower_foot_base_plate, name='base_plate',loc=Location(Vector(0,0,0)))
+    .add(lower_foot_side_wall_left, name='wall_left',color=Color(1,0,1,0.5), loc=Location(Vector(-(lower_feet_assembly_width-lower_feet_assembly_side_wall_thickness)/2,0,lower_feet_assembly_base_plate_height/2+lower_feet_assembly_side_wall_radius)))
+    .add(lower_foot_side_wall_right, name='wall_right',color=Color(0.5,0,1,0.5), loc=Location(Vector((lower_feet_assembly_width-lower_feet_assembly_side_wall_thickness)/2,0,lower_feet_assembly_base_plate_height/2+lower_feet_assembly_side_wall_radius)))
+
+)
+
+show_object(lower_foot_assy_left)
+
+#show_object(assy)